{"title":"Sika Adhesive","description":"\u003cp\u003eShop Sika professional products for auto glass and installations.\u003c\/p\u003e","products":[{"product_id":"auto-glass-sealant-windshield-urethane-glue-sika-flex-p2g-primerless-adhesive-x-1","title":"SikaFlex P2G Premium Primerless To Glass Urethane Adhesive Auto Glass Sealant (1 Tube)","description":"\u003ch2\u003eSikaflex® P2G Premium Auto Glass Urethane Adhesive\u003c\/h2\u003e\n\u003cp\u003eSikaflex® P2G Premium is a thick, black polyurethane adhesive used to bond replacement automotive glass to a vehicle. It comes ready to apply with no mixing required and cures by reacting with moisture in the air.\u003c\/p\u003e\n\u003ch3\u003eWhat Is Included?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSikaflex® P2G Premium black polyurethane adhesive in the quantity specified in the selected listing or pack option.\u003c\/li\u003e\n\u003cli\u003eOne-component formula - no separate hardener or mixing required.\u003c\/li\u003e\n\u003cli\u003eCheck the selected pack quantity and cartridge size before ordering. Adhesive coverage depends on the window size and required bead dimensions.\u003c\/li\u003e\n\u003cli\u003eApplication tools, cleaners, and surface-preparation products are not included unless specifically stated in the listing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich Windows Can I Use It On?\u003c\/h3\u003e\n\u003cp\u003eDesigned for direct-glazed automotive glass, meaning windows bonded into the vehicle with urethane adhesive. Depending on the vehicle's installation requirements, this can include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWindshields.\u003c\/li\u003e\n\u003cli\u003eFixed rear windows or back glass.\u003c\/li\u003e\n\u003cli\u003eFixed quarter windows.\u003c\/li\u003e\n\u003cli\u003eFixed vent windows that require urethane bonding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe mounting method matters:\u003c\/strong\u003e Not every window uses adhesive. Do not assume this product is suitable for roll-down door windows, hinged windows, or gasket-mounted glass. It is not a resin for repairing windshield chips or cracks.\u003c\/p\u003e\n\u003ch3\u003eWhat Is Primer, and What Does \"Primerless to Glass\" Mean?\u003c\/h3\u003e\n\u003cp\u003ePrimer is a separate surface-preparation coating used in some glass installation systems to help adhesive bond to a surface. Depending on the primer and application, it may also help protect exposed metal against corrosion or provide UV protection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo separate glass primer or activator:\u003c\/strong\u003e P2G Premium bonds to properly prepared glass and ceramic frit without a separate Sika primer or activator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is ceramic frit?\u003c\/strong\u003e The ceramic border, usually black, found around many automotive windows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning is still required:\u003c\/strong\u003e Primerless does not mean you can apply it over dirt, oil, moisture, or other contamination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe vehicle frame still needs preparation:\u003c\/strong\u003e Bare metal, scratches, and corrosion must be treated according to Sika's instructions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV protection still matters:\u003c\/strong\u003e Glass without a ceramic coating requires appropriate protection for the adhesive bond.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShould I Buy 1 Tube or 2?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 tube may be enough:\u003c\/strong\u003e Smaller bonded quarter or vent windows, or some smaller windshields and back glass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 tubes may be needed:\u003c\/strong\u003e Larger windshields and back glass, especially where the installation requires a longer or larger adhesive bead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage is an estimate:\u003c\/strong\u003e The amount required depends on the cartridge volume, window perimeter, bead size, and vehicle requirements. Some installations may require more than 2 tubes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfirm the quantity with your installer or installation specifications before starting. Have enough adhesive available to complete the entire bead. Never make the bead smaller just to stretch the supply.\u003c\/p\u003e\n\u003ch3\u003eWhat Tools and Supplies Do I Need?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA professional application gun suitable for thick urethane.\u003c\/strong\u003e Sika recommends a powerful battery-operated gun. A basic household caulking gun may struggle to dispense this product.\u003c\/li\u003e\n\u003cli\u003eAutomotive-grade glass cleaner and Sika-recommended contamination-removal supplies.\u003c\/li\u003e\n\u003cli\u003eGlass removal, trimming, lifting, and positioning tools appropriate for the vehicle.\u003c\/li\u003e\n\u003cli\u003eAny frame-treatment or primer products required for the surfaces involved.\u003c\/li\u003e\n\u003cli\u003eSuitable protective gloves, eye protection, and ventilation as directed by the Safety Data Sheet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBefore starting:\u003c\/strong\u003e Read Sika's current vehicle-glass replacement instructions and the vehicle manufacturer's procedure. Confirm glass fit, adhesive quantity, product date, and working temperatures. This overview is not a complete installation procedure.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the old glass.\u003c\/strong\u003e Use the appropriate removal tools and procedure, taking care to avoid damage to the vehicle's bonding flange, paint, and trim.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the vehicle's bonding flange.\u003c\/strong\u003e This flange, often called the pinchweld, is the edge where the glass bonds to the vehicle. Remove dirt and debris. Address corrosion and bare-metal damage according to Sika's treatment instructions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the remaining urethane.\u003c\/strong\u003e Where suitable existing polyurethane adhesive is present, follow Sika's procedure to trim it back to approximately 1-2 mm. If the previous adhesive is not polyurethane, Sika's illustrated procedure calls for complete removal. Do not bond over unidentified or unsuitable material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean and prepare the replacement glass.\u003c\/strong\u003e Clean the glass with automotive-grade glass cleaner. Remove remaining contamination from the bonding area using Sika's recommended process, such as Sika PowerClean Aid where specified. Surfaces must be clean, dry, and free of oil, grease, dust, and contaminants.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply a continuous triangular bead.\u003c\/strong\u003e Prepare the nozzle for the bead dimensions specified for the vehicle. Hold the gun approximately 90 degrees to the bonding surface and apply an even triangular bead. Follow Sika's instructions to avoid gaps and maintain the required bond thickness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet and position the glass promptly.\u003c\/strong\u003e Install within the adhesive's open time. After initial contact, make only small positioning adjustments. Never install glass after the adhesive has formed a skin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAllow the required time before driving.\u003c\/strong\u003e Observe the 3-hour Minimum Drive Away Time when used under Sika's specified conditions. Follow all required finishing, retention, and vehicle-release procedures.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eHow Much Working Time Do I Have?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen time:\u003c\/strong\u003e Approximately 15 minutes at 73°F (23°C) and 50% relative humidity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHot or humid conditions:\u003c\/strong\u003e Working time can be shorter. Have the glass and equipment ready before applying the adhesive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin time is not installation time:\u003c\/strong\u003e The published skin time is approximately 35 minutes under the same test conditions, but this does not extend the 15-minute open time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat Temperatures Are Suitable for Installation?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive inside the tube:\u003c\/strong\u003e 50-95°F (10-35°C).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurrounding air:\u003c\/strong\u003e 40-110°F (4-43°C).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass and other bonding surfaces:\u003c\/strong\u003e 40-130°F (4-54°C).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCold adhesive becomes thicker and harder to dispense. Allow the tube to reach the recommended product temperature before use. This is a cold-applied adhesive and does not require melting.\u003c\/p\u003e\n\u003ch3\u003eWhen Can I Drive, and What Should I Do After Installation?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Drive Away Time:\u003c\/strong\u003e 3 hours when installed according to Sika's specified conditions, tested according to FMVSS 212.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive-away time is not full cure:\u003c\/strong\u003e The adhesive continues curing after the vehicle reaches its permitted drive-away time.\u003c\/li\u003e\n\u003cli\u003eFollow the installation procedure for retaining tape, trim, vehicle handling, and washing.\u003c\/li\u003e\n\u003cli\u003eDo not assume the vehicle is ready to drive just because the adhesive feels dry on the outside.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow Should I Store It?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStore unopened tubes in their original sealed packaging in a dry indoor location \u003cstrong\u003ebelow 77°F (25°C)\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eAvoid hot vehicles, direct sunlight, and other sources of excessive heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePublished shelf life:\u003c\/strong\u003e 9 months under the specified storage conditions. Check the package date rather than counting from your purchase date.\u003c\/li\u003e\n\u003cli\u003eKeep the tube sealed until ready to use. Exposure to moisture starts the curing process.\u003c\/li\u003e\n\u003cli\u003eDo not assume an opened tube will keep for the remainder of its original shelf life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProper storage helps preserve usable shelf life. Conditioning a cold tube before application makes dispensing easier, while protecting unopened material from moisture helps prevent premature curing.\u003c\/p\u003e\n\u003ch3\u003eHow Do I Clean Up Excess Adhesive?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore curing:\u003c\/strong\u003e Use Sika Remover-208 or another suitable cleaner on tools and equipment, checking compatibility with the surface being cleaned.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAfter curing:\u003c\/strong\u003e Adhesive must be removed mechanically. Take care to avoid damaging glass, paint, or trim.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn skin:\u003c\/strong\u003e Use suitable hand cleaner and water. Never use solvents on skin.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features and Safe Handling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThick, non-sag black polyurethane formula.\u003c\/li\u003e\n\u003cli\u003ePrimerless adhesion to properly prepared glass and ceramic frit.\u003c\/li\u003e\n\u003cli\u003eSuitable for non-conductive applications.\u003c\/li\u003e\n\u003cli\u003eMoisture-curing, one-component adhesive with no mixing required.\u003c\/li\u003e\n\u003cli\u003eMay cause allergic skin or respiratory reactions. Follow the Safety Data Sheet for ventilation, protective equipment, and first aid.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Installation and Safety Information\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSika specifies this product for experienced professional users only.\u003c\/strong\u003e Automotive glass bonding is a safety-critical installation. These product details and application steps are an overview, not a substitute for training or the complete installation procedure. If you are unsure about surface preparation, adhesive compatibility, bead size, or safe drive-away conditions, have a qualified automotive glass installer complete the work.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRead before use:\u003c\/strong\u003e Always follow the current product label, Sika Product Data Sheet, Safety Data Sheet, Sika's vehicle-glass replacement guidelines, and the vehicle manufacturer's instructions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfirm compatibility:\u003c\/strong\u003e This product is designed for automotive glass replacement. Other applications require testing with the actual materials and conditions to verify adhesion and compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse appropriate protection:\u003c\/strong\u003e Follow the Safety Data Sheet for ventilation, protective gloves, eye protection, and any required respiratory protection. Avoid breathing vapors or mist and avoid contact with skin and eyes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnderstand the health risks:\u003c\/strong\u003e This product may cause an allergic skin reaction, allergy or asthma symptoms, or breathing difficulties if inhaled. Prolonged or repeated inhalation exposure may cause organ damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat Should I Do If Installation Conditions Are Not Right?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf the glass or frame is wet, dirty, oily, or contaminated:\u003c\/strong\u003e Stop and prepare the surface using Sika's recommended cleaning and contamination-removal procedure. Do not apply adhesive until the bonding surfaces are clean and dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf the frame has rust or exposed metal:\u003c\/strong\u003e Remove corrosion and treat bare-metal scratches and scrapes according to Sika's corrosion-treatment recommendations. \"Primerless to glass\" does not eliminate preparation of the vehicle frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf the glass has no ceramic coating:\u003c\/strong\u003e Provide the proper UV protection required by Sika for the adhesive bond. Do not assume exposed adhesive is adequately protected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf the tube is cold or difficult to dispense:\u003c\/strong\u003e Allow the adhesive to reach its recommended application temperature of 50-95°F (10-35°C). Cold adhesive becomes thicker. Use an application gun suitable for high-viscosity urethane.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf temperatures are outside the application limits:\u003c\/strong\u003e Postpone installation or bring the work area, adhesive, and bonding surfaces within the specified ranges before starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf conditions are hot or humid:\u003c\/strong\u003e Expect a shorter working time. Prepare the glass and equipment in advance so the glass can be installed within the adhesive's open time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf the open time has passed or the adhesive has formed a skin:\u003c\/strong\u003e Do not install the glass onto that bead. Follow Sika's instructions for removing unsuitable material and preparing for a fresh application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf you do not have enough adhesive:\u003c\/strong\u003e Do not stretch the supply by reducing the required bead size or leaving gaps. Obtain enough material to complete the installation correctly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf the adhesive is expired, partly cured, or its storage history is uncertain:\u003c\/strong\u003e Do not assume it is suitable for a safety-critical bond. Confirm suitability with Sika or use a fresh cartridge stored under the specified conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBefore Driving the Vehicle\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eObserve the 3-hour Minimum Drive Away Time:\u003c\/strong\u003e This applies when the product is used according to Sika's specified installation and test conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not confuse drive-away time with full cure:\u003c\/strong\u003e The adhesive continues curing after the minimum drive-away period.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature and moisture affect curing:\u003c\/strong\u003e The product reacts with atmospheric moisture. Lower temperatures can slow the curing reaction. Follow Sika's instructions rather than judging readiness by touch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf you suspect a bonding or installation problem:\u003c\/strong\u003e Do not drive until a qualified installer has assessed and corrected it. Waiting longer does not correct poor surface preparation, an unsuitable bead, or incorrect glass positioning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFirst Aid - What to Do After Accidental Exposure\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMove away from the exposure and seek medical advice as appropriate.\u003c\/strong\u003e Keep the product label or Safety Data Sheet available to show medical personnel. For severe breathing difficulty or another medical emergency, contact emergency services immediately.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf inhaled:\u003c\/strong\u003e Move to fresh air. Consult a physician after significant exposure. Seek immediate medical attention for breathing difficulty, wheezing, or asthma-like symptoms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf it gets on skin:\u003c\/strong\u003e Remove contaminated clothing and shoes immediately. Wash with soap and plenty of water. Consult a physician if irritation or other symptoms persist. Do not use solvents to clean skin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf it gets in eyes:\u003c\/strong\u003e Remove contact lenses and rinse while holding the eye open. Consult a specialist if irritation persists.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf swallowed:\u003c\/strong\u003e Obtain medical attention. If the person is conscious and able to swallow, rinse the mouth and drink water as directed in the Safety Data Sheet. Do not induce vomiting unless directed by medical personnel. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf an allergic reaction develops:\u003c\/strong\u003e Stop exposure and seek medical advice. Breathing symptoms require urgent attention.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCleanup and Product Guidance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUncured adhesive on tools:\u003c\/strong\u003e Use Sika Remover-208 or another suitable cleaner, following its instructions and checking surface compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCured adhesive:\u003c\/strong\u003e Mechanical removal is required. Take care to avoid damage to glass, paint, and surrounding materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin cleanup:\u003c\/strong\u003e Use suitable hand wipes or industrial hand cleaner and water. Never use adhesive-removal solvents on skin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTechnical questions:\u003c\/strong\u003e Consult Sika's current product documents or contact Sika Technical \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAlways use the latest instructions:\u003c\/strong\u003e Product requirements and safety guidance may be updated. Review the current label, Product Data Sheet, and Safety Data Sheet available at \u003ca href=\"https:\/\/usa.sika.com\/\" rel=\"noopener\" target=\"_blank\"\u003e\u003c\/a\u003e before each use.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":47280317071664,"sku":"1 tube sika","price":17.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1806\/8367\/files\/Sikaflex_1_Tube.png?v=1784916230"},{"product_id":"auto-glass-sealant-windshield-urethane-glue-sikaflex-p2g-primerless-adhesive-x-10","title":"SikaFlex P2G Premium Primerless To Glass Urethane Adhesive Auto Glass Sealant (10 Tubes)","description":"\u003ch2\u003eSikaflex® P2G Premium Auto Glass Urethane Adhesive\u003c\/h2\u003e\n\u003cp\u003eSikaflex® P2G Premium is a thick, black polyurethane adhesive used to bond replacement automotive glass to a vehicle. It comes ready to apply with no mixing required and cures by reacting with moisture in the air.\u003c\/p\u003e\n\u003ch3\u003eWhat Is Included?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSikaflex® P2G Premium black polyurethane adhesive in the quantity specified in the selected listing or pack option.\u003c\/li\u003e\n\u003cli\u003eOne-component formula - no separate hardener or mixing required.\u003c\/li\u003e\n\u003cli\u003eCheck the selected pack quantity and cartridge size before ordering. Adhesive coverage depends on the window size and required bead dimensions.\u003c\/li\u003e\n\u003cli\u003eApplication tools, cleaners, and surface-preparation products are not included unless specifically stated in the listing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich Windows Can I Use It On?\u003c\/h3\u003e\n\u003cp\u003eDesigned for direct-glazed automotive glass, meaning windows bonded into the vehicle with urethane adhesive. Depending on the vehicle's installation requirements, this can include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWindshields.\u003c\/li\u003e\n\u003cli\u003eFixed rear windows or back glass.\u003c\/li\u003e\n\u003cli\u003eFixed quarter windows.\u003c\/li\u003e\n\u003cli\u003eFixed vent windows that require urethane bonding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe mounting method matters:\u003c\/strong\u003e Not every window uses adhesive. Do not assume this product is suitable for roll-down door windows, hinged windows, or gasket-mounted glass. It is not a resin for repairing windshield chips or cracks.\u003c\/p\u003e\n\u003ch3\u003eWhat Is Primer, and What Does \"Primerless to Glass\" Mean?\u003c\/h3\u003e\n\u003cp\u003ePrimer is a separate surface-preparation coating used in some glass installation systems to help adhesive bond to a surface. Depending on the primer and application, it may also help protect exposed metal against corrosion or provide UV protection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo separate glass primer or activator:\u003c\/strong\u003e P2G Premium bonds to properly prepared glass and ceramic frit without a separate Sika primer or activator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is ceramic frit?\u003c\/strong\u003e The ceramic border, usually black, found around many automotive windows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning is still required:\u003c\/strong\u003e Primerless does not mean you can apply it over dirt, oil, moisture, or other contamination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe vehicle frame still needs preparation:\u003c\/strong\u003e Bare metal, scratches, and corrosion must be treated according to Sika's instructions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV protection still matters:\u003c\/strong\u003e Glass without a ceramic coating requires appropriate protection for the adhesive bond.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShould I Buy 1 Tube or 2?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 tube may be enough:\u003c\/strong\u003e Smaller bonded quarter or vent windows, or some smaller windshields and back glass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 tubes may be needed:\u003c\/strong\u003e Larger windshields and back glass, especially where the installation requires a longer or larger adhesive bead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage is an estimate:\u003c\/strong\u003e The amount required depends on the cartridge volume, window perimeter, bead size, and vehicle requirements. Some installations may require more than 2 tubes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfirm the quantity with your installer or installation specifications before starting. Have enough adhesive available to complete the entire bead. Never make the bead smaller just to stretch the supply.\u003c\/p\u003e\n\u003ch3\u003eWhat Tools and Supplies Do I Need?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA professional application gun suitable for thick urethane.\u003c\/strong\u003e Sika recommends a powerful battery-operated gun. A basic household caulking gun may struggle to dispense this product.\u003c\/li\u003e\n\u003cli\u003eAutomotive-grade glass cleaner and Sika-recommended contamination-removal supplies.\u003c\/li\u003e\n\u003cli\u003eGlass removal, trimming, lifting, and positioning tools appropriate for the vehicle.\u003c\/li\u003e\n\u003cli\u003eAny frame-treatment or primer products required for the surfaces involved.\u003c\/li\u003e\n\u003cli\u003eSuitable protective gloves, eye protection, and ventilation as directed by the Safety Data Sheet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBefore starting:\u003c\/strong\u003e Read Sika's current vehicle-glass replacement instructions and the vehicle manufacturer's procedure. Confirm glass fit, adhesive quantity, product date, and working temperatures. This overview is not a complete installation procedure.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the old glass.\u003c\/strong\u003e Use the appropriate removal tools and procedure, taking care to avoid damage to the vehicle's bonding flange, paint, and trim.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the vehicle's bonding flange.\u003c\/strong\u003e This flange, often called the pinchweld, is the edge where the glass bonds to the vehicle. Remove dirt and debris. Address corrosion and bare-metal damage according to Sika's treatment instructions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the remaining urethane.\u003c\/strong\u003e Where suitable existing polyurethane adhesive is present, follow Sika's procedure to trim it back to approximately 1-2 mm. If the previous adhesive is not polyurethane, Sika's illustrated procedure calls for complete removal. Do not bond over unidentified or unsuitable material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean and prepare the replacement glass.\u003c\/strong\u003e Clean the glass with automotive-grade glass cleaner. Remove remaining contamination from the bonding area using Sika's recommended process, such as Sika PowerClean Aid where specified. Surfaces must be clean, dry, and free of oil, grease, dust, and contaminants.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply a continuous triangular bead.\u003c\/strong\u003e Prepare the nozzle for the bead dimensions specified for the vehicle. Hold the gun approximately 90 degrees to the bonding surface and apply an even triangular bead. Follow Sika's instructions to avoid gaps and maintain the required bond thickness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet and position the glass promptly.\u003c\/strong\u003e Install within the adhesive's open time. After initial contact, make only small positioning adjustments. Never install glass after the adhesive has formed a skin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAllow the required time before driving.\u003c\/strong\u003e Observe the 3-hour Minimum Drive Away Time when used under Sika's specified conditions. Follow all required finishing, retention, and vehicle-release procedures.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eHow Much Working Time Do I Have?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen time:\u003c\/strong\u003e Approximately 15 minutes at 73°F (23°C) and 50% relative humidity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHot or humid conditions:\u003c\/strong\u003e Working time can be shorter. Have the glass and equipment ready before applying the adhesive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin time is not installation time:\u003c\/strong\u003e The published skin time is approximately 35 minutes under the same test conditions, but this does not extend the 15-minute open time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat Temperatures Are Suitable for Installation?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive inside the tube:\u003c\/strong\u003e 50-95°F (10-35°C).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurrounding air:\u003c\/strong\u003e 40-110°F (4-43°C).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass and other bonding surfaces:\u003c\/strong\u003e 40-130°F (4-54°C).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCold adhesive becomes thicker and harder to dispense. Allow the tube to reach the recommended product temperature before use. This is a cold-applied adhesive and does not require melting.\u003c\/p\u003e\n\u003ch3\u003eWhen Can I Drive, and What Should I Do After Installation?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Drive Away Time:\u003c\/strong\u003e 3 hours when installed according to Sika's specified conditions, tested according to FMVSS 212.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive-away time is not full cure:\u003c\/strong\u003e The adhesive continues curing after the vehicle reaches its permitted drive-away time.\u003c\/li\u003e\n\u003cli\u003eFollow the installation procedure for retaining tape, trim, vehicle handling, and washing.\u003c\/li\u003e\n\u003cli\u003eDo not assume the vehicle is ready to drive just because the adhesive feels dry on the outside.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow Should I Store It?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStore unopened tubes in their original sealed packaging in a dry indoor location \u003cstrong\u003ebelow 77°F (25°C)\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eAvoid hot vehicles, direct sunlight, and other sources of excessive heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePublished shelf life:\u003c\/strong\u003e 9 months under the specified storage conditions. Check the package date rather than counting from your purchase date.\u003c\/li\u003e\n\u003cli\u003eKeep the tube sealed until ready to use. Exposure to moisture starts the curing process.\u003c\/li\u003e\n\u003cli\u003eDo not assume an opened tube will keep for the remainder of its original shelf life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProper storage helps preserve usable shelf life. Conditioning a cold tube before application makes dispensing easier, while protecting unopened material from moisture helps prevent premature curing.\u003c\/p\u003e\n\u003ch3\u003eHow Do I Clean Up Excess Adhesive?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore curing:\u003c\/strong\u003e Use Sika Remover-208 or another suitable cleaner on tools and equipment, checking compatibility with the surface being cleaned.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAfter curing:\u003c\/strong\u003e Adhesive must be removed mechanically. Take care to avoid damaging glass, paint, or trim.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn skin:\u003c\/strong\u003e Use suitable hand cleaner and water. Never use solvents on skin.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features and Safe Handling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThick, non-sag black polyurethane formula.\u003c\/li\u003e\n\u003cli\u003ePrimerless adhesion to properly prepared glass and ceramic frit.\u003c\/li\u003e\n\u003cli\u003eSuitable for non-conductive applications.\u003c\/li\u003e\n\u003cli\u003eMoisture-curing, one-component adhesive with no mixing required.\u003c\/li\u003e\n\u003cli\u003eMay cause allergic skin or respiratory reactions. Follow the Safety Data Sheet for ventilation, protective equipment, and first aid.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Installation and Safety Information\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSika specifies this product for experienced professional users only.\u003c\/strong\u003e Automotive glass bonding is a safety-critical installation. These product details and application steps are an overview, not a substitute for training or the complete installation procedure. If you are unsure about surface preparation, adhesive compatibility, bead size, or safe drive-away conditions, have a qualified automotive glass installer complete the work.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRead before use:\u003c\/strong\u003e Always follow the current product label, Sika Product Data Sheet, Safety Data Sheet, Sika's vehicle-glass replacement guidelines, and the vehicle manufacturer's instructions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfirm compatibility:\u003c\/strong\u003e This product is designed for automotive glass replacement. Other applications require testing with the actual materials and conditions to verify adhesion and compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse appropriate protection:\u003c\/strong\u003e Follow the Safety Data Sheet for ventilation, protective gloves, eye protection, and any required respiratory protection. Avoid breathing vapors or mist and avoid contact with skin and eyes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnderstand the health risks:\u003c\/strong\u003e This product may cause an allergic skin reaction, allergy or asthma symptoms, or breathing difficulties if inhaled. Prolonged or repeated inhalation exposure may cause organ damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat Should I Do If Installation Conditions Are Not Right?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf the glass or frame is wet, dirty, oily, or contaminated:\u003c\/strong\u003e Stop and prepare the surface using Sika's recommended cleaning and contamination-removal procedure. Do not apply adhesive until the bonding surfaces are clean and dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf the frame has rust or exposed metal:\u003c\/strong\u003e Remove corrosion and treat bare-metal scratches and scrapes according to Sika's corrosion-treatment recommendations. \"Primerless to glass\" does not eliminate preparation of the vehicle frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf the glass has no ceramic coating:\u003c\/strong\u003e Provide the proper UV protection required by Sika for the adhesive bond. Do not assume exposed adhesive is adequately protected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf the tube is cold or difficult to dispense:\u003c\/strong\u003e Allow the adhesive to reach its recommended application temperature of 50-95°F (10-35°C). Cold adhesive becomes thicker. Use an application gun suitable for high-viscosity urethane.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf temperatures are outside the application limits:\u003c\/strong\u003e Postpone installation or bring the work area, adhesive, and bonding surfaces within the specified ranges before starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf conditions are hot or humid:\u003c\/strong\u003e Expect a shorter working time. Prepare the glass and equipment in advance so the glass can be installed within the adhesive's open time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf the open time has passed or the adhesive has formed a skin:\u003c\/strong\u003e Do not install the glass onto that bead. Follow Sika's instructions for removing unsuitable material and preparing for a fresh application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf you do not have enough adhesive:\u003c\/strong\u003e Do not stretch the supply by reducing the required bead size or leaving gaps. Obtain enough material to complete the installation correctly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf the adhesive is expired, partly cured, or its storage history is uncertain:\u003c\/strong\u003e Do not assume it is suitable for a safety-critical bond. Confirm suitability with Sika or use a fresh cartridge stored under the specified conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBefore Driving the Vehicle\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eObserve the 3-hour Minimum Drive Away Time:\u003c\/strong\u003e This applies when the product is used according to Sika's specified installation and test conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not confuse drive-away time with full cure:\u003c\/strong\u003e The adhesive continues curing after the minimum drive-away period.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature and moisture affect curing:\u003c\/strong\u003e The product reacts with atmospheric moisture. Lower temperatures can slow the curing reaction. Follow Sika's instructions rather than judging readiness by touch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf you suspect a bonding or installation problem:\u003c\/strong\u003e Do not drive until a qualified installer has assessed and corrected it. Waiting longer does not correct poor surface preparation, an unsuitable bead, or incorrect glass positioning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFirst Aid - What to Do After Accidental Exposure\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMove away from the exposure and seek medical advice as appropriate.\u003c\/strong\u003e Keep the product label or Safety Data Sheet available to show medical personnel. For severe breathing difficulty or another medical emergency, contact emergency services immediately.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf inhaled:\u003c\/strong\u003e Move to fresh air. Consult a physician after significant exposure. Seek immediate medical attention for breathing difficulty, wheezing, or asthma-like symptoms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf it gets on skin:\u003c\/strong\u003e Remove contaminated clothing and shoes immediately. Wash with soap and plenty of water. Consult a physician if irritation or other symptoms persist. Do not use solvents to clean skin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf it gets in eyes:\u003c\/strong\u003e Remove contact lenses and rinse while holding the eye open. Consult a specialist if irritation persists.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf swallowed:\u003c\/strong\u003e Obtain medical attention. If the person is conscious and able to swallow, rinse the mouth and drink water as directed in the Safety Data Sheet. Do not induce vomiting unless directed by medical personnel. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf an allergic reaction develops:\u003c\/strong\u003e Stop exposure and seek medical advice. Breathing symptoms require urgent attention.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCleanup and Product Guidance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUncured adhesive on tools:\u003c\/strong\u003e Use Sika Remover-208 or another suitable cleaner, following its instructions and checking surface compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCured adhesive:\u003c\/strong\u003e Mechanical removal is required. Take care to avoid damage to glass, paint, and surrounding materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin cleanup:\u003c\/strong\u003e Use suitable hand wipes or industrial hand cleaner and water. Never use adhesive-removal solvents on skin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTechnical questions:\u003c\/strong\u003e Consult Sika's current product documents or contact Sika Technical \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAlways use the latest instructions:\u003c\/strong\u003e Product requirements and safety guidance may be updated. Review the current label, Product Data Sheet, and Safety Data Sheet available at \u003ca href=\"https:\/\/usa.sika.com\/\" rel=\"noopener\" target=\"_blank\"\u003e\u003c\/a\u003e before each use.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":47280320774448,"sku":"10 tube sika","price":84.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1806\/8367\/files\/Sikaflex_10_Tubes.png?v=1784916230"},{"product_id":"auto-glass-sealant-windshield-urethane-glue-sikaflex-p2g-primerless-adhesive-x-2","title":"SikaFlex P2G Premium Primerless To Glass Urethane Adhesive Auto Glass Sealant (2 Tubes)","description":"\u003ch2\u003eSikaflex® P2G Premium Auto Glass Urethane Adhesive\u003c\/h2\u003e\n\u003cp\u003eSikaflex® P2G Premium is a thick, black polyurethane adhesive used to bond replacement automotive glass to a vehicle. It comes ready to apply with no mixing required and cures by reacting with moisture in the air.\u003c\/p\u003e\n\u003ch3\u003eWhat Is Included?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSikaflex® P2G Premium black polyurethane adhesive in the quantity specified in the selected listing or pack option.\u003c\/li\u003e\n\u003cli\u003eOne-component formula - no separate hardener or mixing required.\u003c\/li\u003e\n\u003cli\u003eCheck the selected pack quantity and cartridge size before ordering. Adhesive coverage depends on the window size and required bead dimensions.\u003c\/li\u003e\n\u003cli\u003eApplication tools, cleaners, and surface-preparation products are not included unless specifically stated in the listing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich Windows Can I Use It On?\u003c\/h3\u003e\n\u003cp\u003eDesigned for direct-glazed automotive glass, meaning windows bonded into the vehicle with urethane adhesive. Depending on the vehicle's installation requirements, this can include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWindshields.\u003c\/li\u003e\n\u003cli\u003eFixed rear windows or back glass.\u003c\/li\u003e\n\u003cli\u003eFixed quarter windows.\u003c\/li\u003e\n\u003cli\u003eFixed vent windows that require urethane bonding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe mounting method matters:\u003c\/strong\u003e Not every window uses adhesive. Do not assume this product is suitable for roll-down door windows, hinged windows, or gasket-mounted glass. It is not a resin for repairing windshield chips or cracks.\u003c\/p\u003e\n\u003ch3\u003eWhat Is Primer, and What Does \"Primerless to Glass\" Mean?\u003c\/h3\u003e\n\u003cp\u003ePrimer is a separate surface-preparation coating used in some glass installation systems to help adhesive bond to a surface. Depending on the primer and application, it may also help protect exposed metal against corrosion or provide UV protection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo separate glass primer or activator:\u003c\/strong\u003e P2G Premium bonds to properly prepared glass and ceramic frit without a separate Sika primer or activator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is ceramic frit?\u003c\/strong\u003e The ceramic border, usually black, found around many automotive windows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning is still required:\u003c\/strong\u003e Primerless does not mean you can apply it over dirt, oil, moisture, or other contamination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe vehicle frame still needs preparation:\u003c\/strong\u003e Bare metal, scratches, and corrosion must be treated according to Sika's instructions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV protection still matters:\u003c\/strong\u003e Glass without a ceramic coating requires appropriate protection for the adhesive bond.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShould I Buy 1 Tube or 2?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 tube may be enough:\u003c\/strong\u003e Smaller bonded quarter or vent windows, or some smaller windshields and back glass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 tubes may be needed:\u003c\/strong\u003e Larger windshields and back glass, especially where the installation requires a longer or larger adhesive bead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage is an estimate:\u003c\/strong\u003e The amount required depends on the cartridge volume, window perimeter, bead size, and vehicle requirements. Some installations may require more than 2 tubes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfirm the quantity with your installer or installation specifications before starting. Have enough adhesive available to complete the entire bead. Never make the bead smaller just to stretch the supply.\u003c\/p\u003e\n\u003ch3\u003eWhat Tools and Supplies Do I Need?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA professional application gun suitable for thick urethane.\u003c\/strong\u003e Sika recommends a powerful battery-operated gun. A basic household caulking gun may struggle to dispense this product.\u003c\/li\u003e\n\u003cli\u003eAutomotive-grade glass cleaner and Sika-recommended contamination-removal supplies.\u003c\/li\u003e\n\u003cli\u003eGlass removal, trimming, lifting, and positioning tools appropriate for the vehicle.\u003c\/li\u003e\n\u003cli\u003eAny frame-treatment or primer products required for the surfaces involved.\u003c\/li\u003e\n\u003cli\u003eSuitable protective gloves, eye protection, and ventilation as directed by the Safety Data Sheet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBefore starting:\u003c\/strong\u003e Read Sika's current vehicle-glass replacement instructions and the vehicle manufacturer's procedure. Confirm glass fit, adhesive quantity, product date, and working temperatures. This overview is not a complete installation procedure.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the old glass.\u003c\/strong\u003e Use the appropriate removal tools and procedure, taking care to avoid damage to the vehicle's bonding flange, paint, and trim.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the vehicle's bonding flange.\u003c\/strong\u003e This flange, often called the pinchweld, is the edge where the glass bonds to the vehicle. Remove dirt and debris. Address corrosion and bare-metal damage according to Sika's treatment instructions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the remaining urethane.\u003c\/strong\u003e Where suitable existing polyurethane adhesive is present, follow Sika's procedure to trim it back to approximately 1-2 mm. If the previous adhesive is not polyurethane, Sika's illustrated procedure calls for complete removal. Do not bond over unidentified or unsuitable material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean and prepare the replacement glass.\u003c\/strong\u003e Clean the glass with automotive-grade glass cleaner. Remove remaining contamination from the bonding area using Sika's recommended process, such as Sika PowerClean Aid where specified. Surfaces must be clean, dry, and free of oil, grease, dust, and contaminants.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply a continuous triangular bead.\u003c\/strong\u003e Prepare the nozzle for the bead dimensions specified for the vehicle. Hold the gun approximately 90 degrees to the bonding surface and apply an even triangular bead. Follow Sika's instructions to avoid gaps and maintain the required bond thickness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet and position the glass promptly.\u003c\/strong\u003e Install within the adhesive's open time. After initial contact, make only small positioning adjustments. Never install glass after the adhesive has formed a skin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAllow the required time before driving.\u003c\/strong\u003e Observe the 3-hour Minimum Drive Away Time when used under Sika's specified conditions. Follow all required finishing, retention, and vehicle-release procedures.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eHow Much Working Time Do I Have?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen time:\u003c\/strong\u003e Approximately 15 minutes at 73°F (23°C) and 50% relative humidity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHot or humid conditions:\u003c\/strong\u003e Working time can be shorter. Have the glass and equipment ready before applying the adhesive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin time is not installation time:\u003c\/strong\u003e The published skin time is approximately 35 minutes under the same test conditions, but this does not extend the 15-minute open time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat Temperatures Are Suitable for Installation?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive inside the tube:\u003c\/strong\u003e 50-95°F (10-35°C).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurrounding air:\u003c\/strong\u003e 40-110°F (4-43°C).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass and other bonding surfaces:\u003c\/strong\u003e 40-130°F (4-54°C).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCold adhesive becomes thicker and harder to dispense. Allow the tube to reach the recommended product temperature before use. This is a cold-applied adhesive and does not require melting.\u003c\/p\u003e\n\u003ch3\u003eWhen Can I Drive, and What Should I Do After Installation?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Drive Away Time:\u003c\/strong\u003e 3 hours when installed according to Sika's specified conditions, tested according to FMVSS 212.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive-away time is not full cure:\u003c\/strong\u003e The adhesive continues curing after the vehicle reaches its permitted drive-away time.\u003c\/li\u003e\n\u003cli\u003eFollow the installation procedure for retaining tape, trim, vehicle handling, and washing.\u003c\/li\u003e\n\u003cli\u003eDo not assume the vehicle is ready to drive just because the adhesive feels dry on the outside.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow Should I Store It?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStore unopened tubes in their original sealed packaging in a dry indoor location \u003cstrong\u003ebelow 77°F (25°C)\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eAvoid hot vehicles, direct sunlight, and other sources of excessive heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePublished shelf life:\u003c\/strong\u003e 9 months under the specified storage conditions. Check the package date rather than counting from your purchase date.\u003c\/li\u003e\n\u003cli\u003eKeep the tube sealed until ready to use. Exposure to moisture starts the curing process.\u003c\/li\u003e\n\u003cli\u003eDo not assume an opened tube will keep for the remainder of its original shelf life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProper storage helps preserve usable shelf life. Conditioning a cold tube before application makes dispensing easier, while protecting unopened material from moisture helps prevent premature curing.\u003c\/p\u003e\n\u003ch3\u003eHow Do I Clean Up Excess Adhesive?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore curing:\u003c\/strong\u003e Use Sika Remover-208 or another suitable cleaner on tools and equipment, checking compatibility with the surface being cleaned.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAfter curing:\u003c\/strong\u003e Adhesive must be removed mechanically. Take care to avoid damaging glass, paint, or trim.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn skin:\u003c\/strong\u003e Use suitable hand cleaner and water. Never use solvents on skin.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features and Safe Handling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThick, non-sag black polyurethane formula.\u003c\/li\u003e\n\u003cli\u003ePrimerless adhesion to properly prepared glass and ceramic frit.\u003c\/li\u003e\n\u003cli\u003eSuitable for non-conductive applications.\u003c\/li\u003e\n\u003cli\u003eMoisture-curing, one-component adhesive with no mixing required.\u003c\/li\u003e\n\u003cli\u003eMay cause allergic skin or respiratory reactions. Follow the Safety Data Sheet for ventilation, protective equipment, and first aid.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Installation and Safety Information\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSika specifies this product for experienced professional users only.\u003c\/strong\u003e Automotive glass bonding is a safety-critical installation. These product details and application steps are an overview, not a substitute for training or the complete installation procedure. If you are unsure about surface preparation, adhesive compatibility, bead size, or safe drive-away conditions, have a qualified automotive glass installer complete the work.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRead before use:\u003c\/strong\u003e Always follow the current product label, Sika Product Data Sheet, Safety Data Sheet, Sika's vehicle-glass replacement guidelines, and the vehicle manufacturer's instructions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfirm compatibility:\u003c\/strong\u003e This product is designed for automotive glass replacement. Other applications require testing with the actual materials and conditions to verify adhesion and compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse appropriate protection:\u003c\/strong\u003e Follow the Safety Data Sheet for ventilation, protective gloves, eye protection, and any required respiratory protection. Avoid breathing vapors or mist and avoid contact with skin and eyes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnderstand the health risks:\u003c\/strong\u003e This product may cause an allergic skin reaction, allergy or asthma symptoms, or breathing difficulties if inhaled. Prolonged or repeated inhalation exposure may cause organ damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat Should I Do If Installation Conditions Are Not Right?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf the glass or frame is wet, dirty, oily, or contaminated:\u003c\/strong\u003e Stop and prepare the surface using Sika's recommended cleaning and contamination-removal procedure. Do not apply adhesive until the bonding surfaces are clean and dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf the frame has rust or exposed metal:\u003c\/strong\u003e Remove corrosion and treat bare-metal scratches and scrapes according to Sika's corrosion-treatment recommendations. \"Primerless to glass\" does not eliminate preparation of the vehicle frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf the glass has no ceramic coating:\u003c\/strong\u003e Provide the proper UV protection required by Sika for the adhesive bond. Do not assume exposed adhesive is adequately protected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf the tube is cold or difficult to dispense:\u003c\/strong\u003e Allow the adhesive to reach its recommended application temperature of 50-95°F (10-35°C). Cold adhesive becomes thicker. Use an application gun suitable for high-viscosity urethane.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf temperatures are outside the application limits:\u003c\/strong\u003e Postpone installation or bring the work area, adhesive, and bonding surfaces within the specified ranges before starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf conditions are hot or humid:\u003c\/strong\u003e Expect a shorter working time. Prepare the glass and equipment in advance so the glass can be installed within the adhesive's open time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf the open time has passed or the adhesive has formed a skin:\u003c\/strong\u003e Do not install the glass onto that bead. Follow Sika's instructions for removing unsuitable material and preparing for a fresh application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf you do not have enough adhesive:\u003c\/strong\u003e Do not stretch the supply by reducing the required bead size or leaving gaps. Obtain enough material to complete the installation correctly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf the adhesive is expired, partly cured, or its storage history is uncertain:\u003c\/strong\u003e Do not assume it is suitable for a safety-critical bond. Confirm suitability with Sika or use a fresh cartridge stored under the specified conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBefore Driving the Vehicle\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eObserve the 3-hour Minimum Drive Away Time:\u003c\/strong\u003e This applies when the product is used according to Sika's specified installation and test conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not confuse drive-away time with full cure:\u003c\/strong\u003e The adhesive continues curing after the minimum drive-away period.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature and moisture affect curing:\u003c\/strong\u003e The product reacts with atmospheric moisture. Lower temperatures can slow the curing reaction. Follow Sika's instructions rather than judging readiness by touch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf you suspect a bonding or installation problem:\u003c\/strong\u003e Do not drive until a qualified installer has assessed and corrected it. Waiting longer does not correct poor surface preparation, an unsuitable bead, or incorrect glass positioning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFirst Aid - What to Do After Accidental Exposure\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMove away from the exposure and seek medical advice as appropriate.\u003c\/strong\u003e Keep the product label or Safety Data Sheet available to show medical personnel. For severe breathing difficulty or another medical emergency, contact emergency services immediately.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf inhaled:\u003c\/strong\u003e Move to fresh air. Consult a physician after significant exposure. Seek immediate medical attention for breathing difficulty, wheezing, or asthma-like symptoms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf it gets on skin:\u003c\/strong\u003e Remove contaminated clothing and shoes immediately. Wash with soap and plenty of water. Consult a physician if irritation or other symptoms persist. Do not use solvents to clean skin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf it gets in eyes:\u003c\/strong\u003e Remove contact lenses and rinse while holding the eye open. Consult a specialist if irritation persists.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf swallowed:\u003c\/strong\u003e Obtain medical attention. If the person is conscious and able to swallow, rinse the mouth and drink water as directed in the Safety Data Sheet. Do not induce vomiting unless directed by medical personnel. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf an allergic reaction develops:\u003c\/strong\u003e Stop exposure and seek medical advice. Breathing symptoms require urgent attention.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCleanup and Product Guidance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUncured adhesive on tools:\u003c\/strong\u003e Use Sika Remover-208 or another suitable cleaner, following its instructions and checking surface compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCured adhesive:\u003c\/strong\u003e Mechanical removal is required. Take care to avoid damage to glass, paint, and surrounding materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin cleanup:\u003c\/strong\u003e Use suitable hand wipes or industrial hand cleaner and water. Never use adhesive-removal solvents on skin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTechnical questions:\u003c\/strong\u003e Consult Sika's current product documents or contact Sika Technical \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAlways use the latest instructions:\u003c\/strong\u003e Product requirements and safety guidance may be updated. Review the current label, Product Data Sheet, and Safety Data Sheet available at \u003ca href=\"https:\/\/usa.sika.com\/\" rel=\"noopener\" target=\"_blank\"\u003e\u003c\/a\u003e before each use.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":47280322380080,"sku":"2 tube Sika","price":22.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1806\/8367\/files\/Sikaflex_2_Tubes.png?v=1784916230"},{"product_id":"auto-glass-sealant-windshield-urethane-glue-sikaflex-p2g-primerless-adhesive-x-4","title":"SikaFlex P2G Premium Primerless To Glass Urethane Adhesive Auto Glass Sealant (4 Tubes)","description":"\u003ch2\u003eSikaflex® P2G Premium Auto Glass Urethane Adhesive\u003c\/h2\u003e\n\u003cp\u003eSikaflex® P2G Premium is a thick, black polyurethane adhesive used to bond replacement automotive glass to a vehicle. It comes ready to apply with no mixing required and cures by reacting with moisture in the air.\u003c\/p\u003e\n\u003ch3\u003eWhat Is Included?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSikaflex® P2G Premium black polyurethane adhesive in the quantity specified in the selected listing or pack option.\u003c\/li\u003e\n\u003cli\u003eOne-component formula - no separate hardener or mixing required.\u003c\/li\u003e\n\u003cli\u003eCheck the selected pack quantity and cartridge size before ordering. Adhesive coverage depends on the window size and required bead dimensions.\u003c\/li\u003e\n\u003cli\u003eApplication tools, cleaners, and surface-preparation products are not included unless specifically stated in the listing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich Windows Can I Use It On?\u003c\/h3\u003e\n\u003cp\u003eDesigned for direct-glazed automotive glass, meaning windows bonded into the vehicle with urethane adhesive. Depending on the vehicle's installation requirements, this can include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWindshields.\u003c\/li\u003e\n\u003cli\u003eFixed rear windows or back glass.\u003c\/li\u003e\n\u003cli\u003eFixed quarter windows.\u003c\/li\u003e\n\u003cli\u003eFixed vent windows that require urethane bonding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe mounting method matters:\u003c\/strong\u003e Not every window uses adhesive. Do not assume this product is suitable for roll-down door windows, hinged windows, or gasket-mounted glass. It is not a resin for repairing windshield chips or cracks.\u003c\/p\u003e\n\u003ch3\u003eWhat Is Primer, and What Does \"Primerless to Glass\" Mean?\u003c\/h3\u003e\n\u003cp\u003ePrimer is a separate surface-preparation coating used in some glass installation systems to help adhesive bond to a surface. Depending on the primer and application, it may also help protect exposed metal against corrosion or provide UV protection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo separate glass primer or activator:\u003c\/strong\u003e P2G Premium bonds to properly prepared glass and ceramic frit without a separate Sika primer or activator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is ceramic frit?\u003c\/strong\u003e The ceramic border, usually black, found around many automotive windows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning is still required:\u003c\/strong\u003e Primerless does not mean you can apply it over dirt, oil, moisture, or other contamination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe vehicle frame still needs preparation:\u003c\/strong\u003e Bare metal, scratches, and corrosion must be treated according to Sika's instructions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV protection still matters:\u003c\/strong\u003e Glass without a ceramic coating requires appropriate protection for the adhesive bond.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShould I Buy 1 Tube or 2?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 tube may be enough:\u003c\/strong\u003e Smaller bonded quarter or vent windows, or some smaller windshields and back glass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 tubes may be needed:\u003c\/strong\u003e Larger windshields and back glass, especially where the installation requires a longer or larger adhesive bead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage is an estimate:\u003c\/strong\u003e The amount required depends on the cartridge volume, window perimeter, bead size, and vehicle requirements. Some installations may require more than 2 tubes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfirm the quantity with your installer or installation specifications before starting. Have enough adhesive available to complete the entire bead. Never make the bead smaller just to stretch the supply.\u003c\/p\u003e\n\u003ch3\u003eWhat Tools and Supplies Do I Need?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA professional application gun suitable for thick urethane.\u003c\/strong\u003e Sika recommends a powerful battery-operated gun. A basic household caulking gun may struggle to dispense this product.\u003c\/li\u003e\n\u003cli\u003eAutomotive-grade glass cleaner and Sika-recommended contamination-removal supplies.\u003c\/li\u003e\n\u003cli\u003eGlass removal, trimming, lifting, and positioning tools appropriate for the vehicle.\u003c\/li\u003e\n\u003cli\u003eAny frame-treatment or primer products required for the surfaces involved.\u003c\/li\u003e\n\u003cli\u003eSuitable protective gloves, eye protection, and ventilation as directed by the Safety Data Sheet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBefore starting:\u003c\/strong\u003e Read Sika's current vehicle-glass replacement instructions and the vehicle manufacturer's procedure. Confirm glass fit, adhesive quantity, product date, and working temperatures. This overview is not a complete installation procedure.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the old glass.\u003c\/strong\u003e Use the appropriate removal tools and procedure, taking care to avoid damage to the vehicle's bonding flange, paint, and trim.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the vehicle's bonding flange.\u003c\/strong\u003e This flange, often called the pinchweld, is the edge where the glass bonds to the vehicle. Remove dirt and debris. Address corrosion and bare-metal damage according to Sika's treatment instructions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the remaining urethane.\u003c\/strong\u003e Where suitable existing polyurethane adhesive is present, follow Sika's procedure to trim it back to approximately 1-2 mm. If the previous adhesive is not polyurethane, Sika's illustrated procedure calls for complete removal. Do not bond over unidentified or unsuitable material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean and prepare the replacement glass.\u003c\/strong\u003e Clean the glass with automotive-grade glass cleaner. Remove remaining contamination from the bonding area using Sika's recommended process, such as Sika PowerClean Aid where specified. Surfaces must be clean, dry, and free of oil, grease, dust, and contaminants.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply a continuous triangular bead.\u003c\/strong\u003e Prepare the nozzle for the bead dimensions specified for the vehicle. Hold the gun approximately 90 degrees to the bonding surface and apply an even triangular bead. Follow Sika's instructions to avoid gaps and maintain the required bond thickness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet and position the glass promptly.\u003c\/strong\u003e Install within the adhesive's open time. After initial contact, make only small positioning adjustments. Never install glass after the adhesive has formed a skin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAllow the required time before driving.\u003c\/strong\u003e Observe the 3-hour Minimum Drive Away Time when used under Sika's specified conditions. Follow all required finishing, retention, and vehicle-release procedures.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eHow Much Working Time Do I Have?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen time:\u003c\/strong\u003e Approximately 15 minutes at 73°F (23°C) and 50% relative humidity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHot or humid conditions:\u003c\/strong\u003e Working time can be shorter. Have the glass and equipment ready before applying the adhesive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin time is not installation time:\u003c\/strong\u003e The published skin time is approximately 35 minutes under the same test conditions, but this does not extend the 15-minute open time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat Temperatures Are Suitable for Installation?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive inside the tube:\u003c\/strong\u003e 50-95°F (10-35°C).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurrounding air:\u003c\/strong\u003e 40-110°F (4-43°C).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass and other bonding surfaces:\u003c\/strong\u003e 40-130°F (4-54°C).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCold adhesive becomes thicker and harder to dispense. Allow the tube to reach the recommended product temperature before use. This is a cold-applied adhesive and does not require melting.\u003c\/p\u003e\n\u003ch3\u003eWhen Can I Drive, and What Should I Do After Installation?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Drive Away Time:\u003c\/strong\u003e 3 hours when installed according to Sika's specified conditions, tested according to FMVSS 212.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive-away time is not full cure:\u003c\/strong\u003e The adhesive continues curing after the vehicle reaches its permitted drive-away time.\u003c\/li\u003e\n\u003cli\u003eFollow the installation procedure for retaining tape, trim, vehicle handling, and washing.\u003c\/li\u003e\n\u003cli\u003eDo not assume the vehicle is ready to drive just because the adhesive feels dry on the outside.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow Should I Store It?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStore unopened tubes in their original sealed packaging in a dry indoor location \u003cstrong\u003ebelow 77°F (25°C)\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eAvoid hot vehicles, direct sunlight, and other sources of excessive heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePublished shelf life:\u003c\/strong\u003e 9 months under the specified storage conditions. Check the package date rather than counting from your purchase date.\u003c\/li\u003e\n\u003cli\u003eKeep the tube sealed until ready to use. Exposure to moisture starts the curing process.\u003c\/li\u003e\n\u003cli\u003eDo not assume an opened tube will keep for the remainder of its original shelf life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProper storage helps preserve usable shelf life. Conditioning a cold tube before application makes dispensing easier, while protecting unopened material from moisture helps prevent premature curing.\u003c\/p\u003e\n\u003ch3\u003eHow Do I Clean Up Excess Adhesive?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore curing:\u003c\/strong\u003e Use Sika Remover-208 or another suitable cleaner on tools and equipment, checking compatibility with the surface being cleaned.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAfter curing:\u003c\/strong\u003e Adhesive must be removed mechanically. Take care to avoid damaging glass, paint, or trim.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn skin:\u003c\/strong\u003e Use suitable hand cleaner and water. Never use solvents on skin.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features and Safe Handling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThick, non-sag black polyurethane formula.\u003c\/li\u003e\n\u003cli\u003ePrimerless adhesion to properly prepared glass and ceramic frit.\u003c\/li\u003e\n\u003cli\u003eSuitable for non-conductive applications.\u003c\/li\u003e\n\u003cli\u003eMoisture-curing, one-component adhesive with no mixing required.\u003c\/li\u003e\n\u003cli\u003eMay cause allergic skin or respiratory reactions. Follow the Safety Data Sheet for ventilation, protective equipment, and first aid.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Installation and Safety Information\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSika specifies this product for experienced professional users only.\u003c\/strong\u003e Automotive glass bonding is a safety-critical installation. These product details and application steps are an overview, not a substitute for training or the complete installation procedure. If you are unsure about surface preparation, adhesive compatibility, bead size, or safe drive-away conditions, have a qualified automotive glass installer complete the work.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRead before use:\u003c\/strong\u003e Always follow the current product label, Sika Product Data Sheet, Safety Data Sheet, Sika's vehicle-glass replacement guidelines, and the vehicle manufacturer's instructions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfirm compatibility:\u003c\/strong\u003e This product is designed for automotive glass replacement. Other applications require testing with the actual materials and conditions to verify adhesion and compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse appropriate protection:\u003c\/strong\u003e Follow the Safety Data Sheet for ventilation, protective gloves, eye protection, and any required respiratory protection. Avoid breathing vapors or mist and avoid contact with skin and eyes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnderstand the health risks:\u003c\/strong\u003e This product may cause an allergic skin reaction, allergy or asthma symptoms, or breathing difficulties if inhaled. Prolonged or repeated inhalation exposure may cause organ damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat Should I Do If Installation Conditions Are Not Right?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf the glass or frame is wet, dirty, oily, or contaminated:\u003c\/strong\u003e Stop and prepare the surface using Sika's recommended cleaning and contamination-removal procedure. Do not apply adhesive until the bonding surfaces are clean and dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf the frame has rust or exposed metal:\u003c\/strong\u003e Remove corrosion and treat bare-metal scratches and scrapes according to Sika's corrosion-treatment recommendations. \"Primerless to glass\" does not eliminate preparation of the vehicle frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf the glass has no ceramic coating:\u003c\/strong\u003e Provide the proper UV protection required by Sika for the adhesive bond. Do not assume exposed adhesive is adequately protected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf the tube is cold or difficult to dispense:\u003c\/strong\u003e Allow the adhesive to reach its recommended application temperature of 50-95°F (10-35°C). Cold adhesive becomes thicker. Use an application gun suitable for high-viscosity urethane.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf temperatures are outside the application limits:\u003c\/strong\u003e Postpone installation or bring the work area, adhesive, and bonding surfaces within the specified ranges before starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf conditions are hot or humid:\u003c\/strong\u003e Expect a shorter working time. Prepare the glass and equipment in advance so the glass can be installed within the adhesive's open time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf the open time has passed or the adhesive has formed a skin:\u003c\/strong\u003e Do not install the glass onto that bead. Follow Sika's instructions for removing unsuitable material and preparing for a fresh application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf you do not have enough adhesive:\u003c\/strong\u003e Do not stretch the supply by reducing the required bead size or leaving gaps. Obtain enough material to complete the installation correctly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf the adhesive is expired, partly cured, or its storage history is uncertain:\u003c\/strong\u003e Do not assume it is suitable for a safety-critical bond. Confirm suitability with Sika or use a fresh cartridge stored under the specified conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBefore Driving the Vehicle\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eObserve the 3-hour Minimum Drive Away Time:\u003c\/strong\u003e This applies when the product is used according to Sika's specified installation and test conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not confuse drive-away time with full cure:\u003c\/strong\u003e The adhesive continues curing after the minimum drive-away period.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature and moisture affect curing:\u003c\/strong\u003e The product reacts with atmospheric moisture. Lower temperatures can slow the curing reaction. Follow Sika's instructions rather than judging readiness by touch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf you suspect a bonding or installation problem:\u003c\/strong\u003e Do not drive until a qualified installer has assessed and corrected it. Waiting longer does not correct poor surface preparation, an unsuitable bead, or incorrect glass positioning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFirst Aid - What to Do After Accidental Exposure\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMove away from the exposure and seek medical advice as appropriate.\u003c\/strong\u003e Keep the product label or Safety Data Sheet available to show medical personnel. For severe breathing difficulty or another medical emergency, contact emergency services immediately.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf inhaled:\u003c\/strong\u003e Move to fresh air. Consult a physician after significant exposure. Seek immediate medical attention for breathing difficulty, wheezing, or asthma-like symptoms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf it gets on skin:\u003c\/strong\u003e Remove contaminated clothing and shoes immediately. Wash with soap and plenty of water. Consult a physician if irritation or other symptoms persist. Do not use solvents to clean skin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf it gets in eyes:\u003c\/strong\u003e Remove contact lenses and rinse while holding the eye open. Consult a specialist if irritation persists.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf swallowed:\u003c\/strong\u003e Obtain medical attention. If the person is conscious and able to swallow, rinse the mouth and drink water as directed in the Safety Data Sheet. Do not induce vomiting unless directed by medical personnel. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf an allergic reaction develops:\u003c\/strong\u003e Stop exposure and seek medical advice. Breathing symptoms require urgent attention.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCleanup and Product Guidance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUncured adhesive on tools:\u003c\/strong\u003e Use Sika Remover-208 or another suitable cleaner, following its instructions and checking surface compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCured adhesive:\u003c\/strong\u003e Mechanical removal is required. Take care to avoid damage to glass, paint, and surrounding materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin cleanup:\u003c\/strong\u003e Use suitable hand wipes or industrial hand cleaner and water. Never use adhesive-removal solvents on skin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTechnical questions:\u003c\/strong\u003e Consult Sika's current product documents or contact Sika Technical \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAlways use the latest instructions:\u003c\/strong\u003e Product requirements and safety guidance may be updated. Review the current label, Product Data Sheet, and Safety Data Sheet available at \u003ca href=\"https:\/\/usa.sika.com\/\" rel=\"noopener\" target=\"_blank\"\u003e\u003c\/a\u003e before each use.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":67399718601008,"sku":"4 tubes Sika","price":37.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1806\/8367\/files\/Sikaflex_4_Tubes.png?v=1784916230"},{"product_id":"sika-primer-207-agr-automotive-glass-adhesion-primer-100-ml-6-wool-daubers","title":"Sika Primer-207 AGR Automotive Glass Adhesion Primer 100 ml + 6 Wool Daubers","description":"\u003cp\u003e\u003cstrong\u003eSika® Primer-207\u003c\/strong\u003e is a professional, solvent-based black primer formulated to prepare bonding surfaces before applying Sika one-component polyurethane adhesives and sealants. The moisture-reactive formula creates a thin linking layer between the substrate and adhesive, helping improve adhesion across a wide variety of automotive glass surfaces.\u003c\/p\u003e\n\u003cp\u003eSuitable substrates include float glass, ceramic-coated glass, plastics, pre-coated materials, painted surfaces, E-coats, and metals. The primer temporarily fluoresces under long-wave UV light, allowing professional installers to verify coverage during application.\u003c\/p\u003e\n\u003ch3\u003eIncludes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 bottle of Sika® Primer-207\u003c\/li\u003e\n\u003cli\u003e6 wool dauber applicators\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional black primer for automotive glass bonding\u003c\/li\u003e\n\u003cli\u003eFormulated for use before Sika one-component polyurethane adhesives and sealants\u003c\/li\u003e\n\u003cli\u003eImproves adhesion across a broad range of substrates\u003c\/li\u003e\n\u003cli\u003eSuitable for float glass, ceramic-coated glass, plastics, pre-coatings, painted surfaces, E-coats, and metals\u003c\/li\u003e\n\u003cli\u003eMoisture-reactive formula creates a linking layer between the substrate and adhesive\u003c\/li\u003e\n\u003cli\u003eTemporarily visible under long-wave UV light for application verification\u003c\/li\u003e\n\u003cli\u003eApplied with a clean brush, felt, foam applicator, or wool dauber\u003c\/li\u003e\n\u003cli\u003eBlack liquid formula\u003c\/li\u003e\n\u003cli\u003eApplication temperature range of 41°F to 104°F (5°C to 40°C)\u003c\/li\u003e\n\u003cli\u003eIdeal for experienced professional installers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage Includes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1 × 8.45 fl. oz. \/ 250 mL Bottle of Sika® Primer-207\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6 × Wool Dauber Applicators\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eFlash-Off Time\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllow at least 10 minutes at temperatures above 41°F (5°C)\u003c\/li\u003e\n\u003cli\u003eMaximum flash-off time is 24 hours under standard conditions\u003c\/li\u003e\n\u003cli\u003eActual flash-off time may vary by application, temperature, humidity, and substrate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMake sure all bonding surfaces are clean, dry, and free from grease, oil, dust, and contaminants.\u003c\/li\u003e\n\u003cli\u003eShake the container thoroughly until the mixing balls move freely, then continue shaking as directed by Sika.\u003c\/li\u003e\n\u003cli\u003eApply one thin but fully covering coat using a clean wool dauber, brush, felt, or foam applicator.\u003c\/li\u003e\n\u003cli\u003eUse a fresh applicator and do not return a contaminated dauber to the bottle.\u003c\/li\u003e\n\u003cli\u003eAllow the primer to flash off completely before applying the compatible Sika adhesive or sealant.\u003c\/li\u003e\n\u003cli\u003eReseal the container immediately after each use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHelpful Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not apply an excessively thick coat, as this can increase the required flash-off time.\u003c\/li\u003e\n\u003cli\u003eNever dilute or mix the primer with other substances.\u003c\/li\u003e\n\u003cli\u003eDiscard the primer if it gels, separates, or develops a significant increase in viscosity.\u003c\/li\u003e\n\u003cli\u003eStore the sealed bottle upright in a dry location at or below 77°F (25°C).\u003c\/li\u003e\n\u003cli\u003eTest the actual substrate and installation conditions to confirm adhesion and material compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant\u003c\/h3\u003e\n\u003cp\u003eFor experienced professional users only. Always follow the current Sika product label, Product Data Sheet, Safety Data Sheet, adhesive-system instructions, and vehicle manufacturer procedures. Sika® Primer-207 is a flammable solvent-based product, and shipping restrictions may apply.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":67513820545328,"sku":"Sika Prime-6 wool stick","price":34.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1806\/8367\/files\/sikaprimerball.png?v=1786660025"}],"url":"https:\/\/www.nationalautoglassdirect.net\/collections\/sika.oembed","provider":"National Auto Glass Direct","version":"1.0","type":"link"}